Re: Slicer hangout @ 10am EST

classic Classic list List threaded Threaded
11 messages Options
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Jean-Christophe Fillion-Robin
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Jean-Christophe Fillion-Robin
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170228


Today, we will review the PR with updated contribution guidelines


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc


On Tue, Feb 21, 2017 at 9:53 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Jean-Christophe Fillion-Robin
Hi Slicers,

Steve and I reviewed the contribution guidelines are added the following new sections:
* How to efficiently contribute
* Decision-making process
* Benevolent dictators for life

We welcome your feedback.

Thanks
Jc

On Tue, Feb 28, 2017 at 9:48 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170228


Today, we will review the PR with updated contribution guidelines


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc


On Tue, Feb 21, 2017 at 9:53 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Jean-Christophe Fillion-Robin
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170307


Today, we will:

* address the comment related to proposed contribution guidelines
* discuss plan for improving the Slicer package download experience


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc



On Tue, Feb 28, 2017 at 10:50 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Steve and I reviewed the contribution guidelines are added the following new sections:
* How to efficiently contribute
* Decision-making process
* Benevolent dictators for life

We welcome your feedback.

Thanks
Jc

On Tue, Feb 28, 2017 at 9:48 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170228


Today, we will review the PR with updated contribution guidelines


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc


On Tue, Feb 21, 2017 at 9:53 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Jody Smith
What time are the hangouts?

Jody Smith

On Tue, Mar 7, 2017 at 10:01 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170307


Today, we will:

* address the comment related to proposed contribution guidelines
* discuss plan for improving the Slicer package download experience


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc



On Tue, Feb 28, 2017 at 10:50 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Steve and I reviewed the contribution guidelines are added the following new sections:
* How to efficiently contribute
* Decision-making process
* Benevolent dictators for life

We welcome your feedback.

Thanks
Jc

On Tue, Feb 28, 2017 at 9:48 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170228


Today, we will review the PR with updated contribution guidelines


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc


On Tue, Feb 21, 2017 at 9:53 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ


_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Hina Shah
It is going on right now.

Hina

On Tue, Mar 7, 2017 at 10:16 AM, Jody Smith <[hidden email]> wrote:
What time are the hangouts?

Jody Smith

On Tue, Mar 7, 2017 at 10:01 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170307


Today, we will:

* address the comment related to proposed contribution guidelines
* discuss plan for improving the Slicer package download experience


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc



On Tue, Feb 28, 2017 at 10:50 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Steve and I reviewed the contribution guidelines are added the following new sections:
* How to efficiently contribute
* Decision-making process
* Benevolent dictators for life

We welcome your feedback.

Thanks
Jc

On Tue, Feb 28, 2017 at 9:48 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170228


Today, we will review the PR with updated contribution guidelines


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc


On Tue, Feb 21, 2017 at 9:53 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ


_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ


_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Jean-Christophe Fillion-Robin
In reply to this post by Jean-Christophe Fillion-Robin
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170314


Today, we will discuss how to improve the module and extension listing available from the user manual.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Mar 7, 2017 at 10:01 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170307


Today, we will:

* address the comment related to proposed contribution guidelines
* discuss plan for improving the Slicer package download experience


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc



On Tue, Feb 28, 2017 at 10:50 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Steve and I reviewed the contribution guidelines are added the following new sections:
* How to efficiently contribute
* Decision-making process
* Benevolent dictators for life

We welcome your feedback.

Thanks
Jc

On Tue, Feb 28, 2017 at 9:48 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170228


Today, we will review the PR with updated contribution guidelines


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc


On Tue, Feb 21, 2017 at 9:53 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Jean-Christophe Fillion-Robin
Hi Slicer,

My apologize for missing today's meeting, looking forward next week discussion.

In the mean time, do not hesitate to update the agenda:

  https://www.slicer.org/wiki/Developer_Meetings/20170328

Thanks
Jc

On Tue, Mar 14, 2017 at 9:43 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170314


Today, we will discuss how to improve the module and extension listing available from the user manual.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Mar 7, 2017 at 10:01 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170307


Today, we will:

* address the comment related to proposed contribution guidelines
* discuss plan for improving the Slicer package download experience


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc



On Tue, Feb 28, 2017 at 10:50 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Steve and I reviewed the contribution guidelines are added the following new sections:
* How to efficiently contribute
* Decision-making process
* Benevolent dictators for life

We welcome your feedback.

Thanks
Jc

On Tue, Feb 28, 2017 at 9:48 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170228


Today, we will review the PR with updated contribution guidelines


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc


On Tue, Feb 21, 2017 at 9:53 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Jean-Christophe Fillion-Robin
Hi Slicer,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170328


Today, we will discuss:

* Creation of private mailing list to facilitate the management of web resources managed by the core developers (e.g slicerbot github user, etc ..)

* Automatic generation of API documentation. See https://github.com/Slicer/Slicer/pull/690

* Slicer module/extension templates: Extensions/Testing vs Utilities/Templates

* the Gitbook CEO reply to our inquiry about increasing the limit and asked "How many people to you foresee contributing to your docs ?"

* writing a request for adding Slicer license as an official SPDX (Software Package Data Exchange) License. See https://spdx.org/licenses/



Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw

Thanks
Jc


On Tue, Mar 21, 2017 at 10:30 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicer,

My apologize for missing today's meeting, looking forward next week discussion.

In the mean time, do not hesitate to update the agenda:

  https://www.slicer.org/wiki/Developer_Meetings/20170328

Thanks
Jc

On Tue, Mar 14, 2017 at 9:43 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170314


Today, we will discuss how to improve the module and extension listing available from the user manual.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Mar 7, 2017 at 10:01 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170307


Today, we will:

* address the comment related to proposed contribution guidelines
* discuss plan for improving the Slicer package download experience


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc



On Tue, Feb 28, 2017 at 10:50 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Steve and I reviewed the contribution guidelines are added the following new sections:
* How to efficiently contribute
* Decision-making process
* Benevolent dictators for life

We welcome your feedback.

Thanks
Jc

On Tue, Feb 28, 2017 at 9:48 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170228


Today, we will review the PR with updated contribution guidelines


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc


On Tue, Feb 21, 2017 at 9:53 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Jean-Christophe Fillion-Robin
Hi Slicer,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170404


Today, we will review outstanding Pull Requests


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone numbers:

   http://bit.ly/slicer-hangout-kw

Thanks
Jc


On Tue, Mar 28, 2017 at 7:15 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicer,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170328


Today, we will discuss:

* Creation of private mailing list to facilitate the management of web resources managed by the core developers (e.g slicerbot github user, etc ..)

* Automatic generation of API documentation. See https://github.com/Slicer/Slicer/pull/690

* Slicer module/extension templates: Extensions/Testing vs Utilities/Templates

* the Gitbook CEO reply to our inquiry about increasing the limit and asked "How many people to you foresee contributing to your docs ?"

* writing a request for adding Slicer license as an official SPDX (Software Package Data Exchange) License. See https://spdx.org/licenses/



Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw

Thanks
Jc


On Tue, Mar 21, 2017 at 10:30 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicer,

My apologize for missing today's meeting, looking forward next week discussion.

In the mean time, do not hesitate to update the agenda:

  https://www.slicer.org/wiki/Developer_Meetings/20170328

Thanks
Jc

On Tue, Mar 14, 2017 at 9:43 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170314


Today, we will discuss how to improve the module and extension listing available from the user manual.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Mar 7, 2017 at 10:01 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170307


Today, we will:

* address the comment related to proposed contribution guidelines
* discuss plan for improving the Slicer package download experience


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc



On Tue, Feb 28, 2017 at 10:50 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Steve and I reviewed the contribution guidelines are added the following new sections:
* How to efficiently contribute
* Decision-making process
* Benevolent dictators for life

We welcome your feedback.

Thanks
Jc

On Tue, Feb 28, 2017 at 9:48 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170228


Today, we will review the PR with updated contribution guidelines


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc


On Tue, Feb 21, 2017 at 9:53 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Slicer hangout @ 10am EST

Jean-Christophe Fillion-Robin
Hi Slicer,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170411


Today, we will:
* review the new discourse instance
* discuss next step regarding gitbook
* discuss redirect from slicer.org/doc to apidocs.slicer.org/master

Note that today, we are using the hangout hosted by Kitware, it allows to call in phone numbers:

   http://bit.ly/slicer-hangout-kw

Thanks
Jc

On Tue, Apr 4, 2017 at 9:26 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicer,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170404


Today, we will review outstanding Pull Requests


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone numbers:

   http://bit.ly/slicer-hangout-kw

Thanks
Jc


On Tue, Mar 28, 2017 at 7:15 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicer,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170328


Today, we will discuss:

* Creation of private mailing list to facilitate the management of web resources managed by the core developers (e.g slicerbot github user, etc ..)

* Automatic generation of API documentation. See https://github.com/Slicer/Slicer/pull/690

* Slicer module/extension templates: Extensions/Testing vs Utilities/Templates

* the Gitbook CEO reply to our inquiry about increasing the limit and asked "How many people to you foresee contributing to your docs ?"

* writing a request for adding Slicer license as an official SPDX (Software Package Data Exchange) License. See https://spdx.org/licenses/



Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw

Thanks
Jc


On Tue, Mar 21, 2017 at 10:30 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicer,

My apologize for missing today's meeting, looking forward next week discussion.

In the mean time, do not hesitate to update the agenda:

  https://www.slicer.org/wiki/Developer_Meetings/20170328

Thanks
Jc

On Tue, Mar 14, 2017 at 9:43 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170314


Today, we will discuss how to improve the module and extension listing available from the user manual.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Mar 7, 2017 at 10:01 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170307


Today, we will:

* address the comment related to proposed contribution guidelines
* discuss plan for improving the Slicer package download experience


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc



On Tue, Feb 28, 2017 at 10:50 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers,

Steve and I reviewed the contribution guidelines are added the following new sections:
* How to efficiently contribute
* Decision-making process
* Benevolent dictators for life

We welcome your feedback.

Thanks
Jc

On Tue, Feb 28, 2017 at 9:48 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170228


Today, we will review the PR with updated contribution guidelines


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc


On Tue, Feb 21, 2017 at 9:53 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170221


Today, we will talk about the Slicer docker images.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

On Tue, Feb 14, 2017 at 9:41 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170214

There are no particular topic listed. It will be open discussions.


Note that today, we are using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks

On Tue, Feb 7, 2017 at 9:55 AM, Jean-Christophe Fillion-Robin <[hidden email]> wrote:
Hi Slicers, 

Agenda for today's hangout is available at:

   https://www.slicer.org/wiki/Developer_Meetings/20170207

We will discuss the content of the contributing guidelines.


Note that today, we are switching back to using the hangout hosted by Kitware, it allows to call in phone number:

   http://bit.ly/slicer-hangout-kw


Thanks
Jc

--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
<a href="tel:(919)%20869-8849" value="&#43;19198698849" target="_blank">+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
+1 919 869 8849

_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ