Some progress on my Sierra build woes

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

Some progress on my Sierra build woes

Bill Lorensen
Folks,

I have found the problem, but not a fix.

For example, in the link.txt file for

Slicer/Base/QTGUI
/usr/local/lib/libPythonQT.dylib is listed, but it should be:
/Users/lorensen/ProjectsGIT/Slicer-Superbuild/CTK-build/PythonQt-build/./libPythonQt.dylib

If I manually edit that link.txt file, Slicer starts (although lots of
scriptable modules fail to load).

Now I need to see why the wrong library is being used.


--
Unpaid intern in BillsBasement at noware dot com
_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Some progress on my Sierra build woes

andrey.fedorov
Did you change the default path to qmake while running cmake initially?

On Thu, Feb 9, 2017 at 12:13 PM, Bill Lorensen <[hidden email]> wrote:
Folks,

I have found the problem, but not a fix.

For example, in the link.txt file for

Slicer/Base/QTGUI
/usr/local/lib/libPythonQT.dylib is listed, but it should be:
/Users/lorensen/ProjectsGIT/Slicer-Superbuild/CTK-build/PythonQt-build/./libPythonQt.dylib

If I manually edit that link.txt file, Slicer starts (although lots of
scriptable modules fail to load).

Now I need to see why the wrong library is being used.


--
Unpaid intern in BillsBasement at noware dot com
_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ


_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Some progress on my Sierra build woes

Bill Lorensen
In reply to this post by Bill Lorensen
No. But it finds /usr/local/bin/qmake. If I change to
/usr/local/Cellar/qt/4.8.7_3/bin/qmake I still get the same errors and
/usr/local/lib/libPythonQt.dylib is still listed in the link.txt
files.


On Thu, Feb 9, 2017 at 12:41 PM, Andrey Fedorov
<[hidden email]> wrote:

> Did you change the default path to qmake while running cmake initially?
>
> On Thu, Feb 9, 2017 at 12:13 PM, Bill Lorensen <[hidden email]>
> wrote:
>>
>> Folks,
>>
>> I have found the problem, but not a fix.
>>
>> For example, in the link.txt file for
>>
>> Slicer/Base/QTGUI
>> /usr/local/lib/libPythonQT.dylib is listed, but it should be:
>>
>> /Users/lorensen/ProjectsGIT/Slicer-Superbuild/CTK-build/PythonQt-build/./libPythonQt.dylib
>>
>> If I manually edit that link.txt file, Slicer starts (although lots of
>> scriptable modules fail to load).
>>
>> Now I need to see why the wrong library is being used.
>>
>>
>> --
>> Unpaid intern in BillsBasement at noware dot com
>> _______________________________________________
>> slicer-devel mailing list
>> [hidden email]
>> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
>> To unsubscribe: send email to [hidden email] with
>> unsubscribe as the subject
>>
>> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>
>



--
Unpaid intern in BillsBasement at noware dot com
_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Some progress on my Sierra build woes

andrey.fedorov
In reply to this post by Bill Lorensen
Bill, you may need to rebuild from scratch after changing the qmake path ... :(

On Thu, Feb 9, 2017 at 1:01 PM, Bill Lorensen <[hidden email]> wrote:
No. But it finds /usr/local/bin/qmake. If I change to
/usr/local/Cellar/qt/4.8.7_3/bin/qmake I still get the same errors and
/usr/local/lib/libPythonQt.dylib is still listed in the link.txt
files.


On Thu, Feb 9, 2017 at 12:41 PM, Andrey Fedorov
<[hidden email]> wrote:
> Did you change the default path to qmake while running cmake initially?
>
> On Thu, Feb 9, 2017 at 12:13 PM, Bill Lorensen <[hidden email]>
> wrote:
>>
>> Folks,
>>
>> I have found the problem, but not a fix.
>>
>> For example, in the link.txt file for
>>
>> Slicer/Base/QTGUI
>> /usr/local/lib/libPythonQT.dylib is listed, but it should be:
>>
>> /Users/lorensen/ProjectsGIT/Slicer-Superbuild/CTK-build/PythonQt-build/./libPythonQt.dylib
>>
>> If I manually edit that link.txt file, Slicer starts (although lots of
>> scriptable modules fail to load).
>>
>> Now I need to see why the wrong library is being used.
>>
>>
>> --
>> Unpaid intern in BillsBasement at noware dot com
>> _______________________________________________
>> slicer-devel mailing list
>> [hidden email]
>> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
>> To unsubscribe: send email to [hidden email] with
>> unsubscribe as the subject
>>
>> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>
>



--
Unpaid intern in BillsBasement at noware dot com


_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Some progress on my Sierra build woes

Bill Lorensen
In reply to this post by Bill Lorensen
Yes, I am rebuilding from scratch.


On Thu, Feb 9, 2017 at 1:24 PM, Andrey Fedorov <[hidden email]> wrote:

> Bill, you may need to rebuild from scratch after changing the qmake path ...
> :(
>
> On Thu, Feb 9, 2017 at 1:01 PM, Bill Lorensen <[hidden email]>
> wrote:
>>
>> No. But it finds /usr/local/bin/qmake. If I change to
>> /usr/local/Cellar/qt/4.8.7_3/bin/qmake I still get the same errors and
>> /usr/local/lib/libPythonQt.dylib is still listed in the link.txt
>> files.
>>
>>
>> On Thu, Feb 9, 2017 at 12:41 PM, Andrey Fedorov
>> <[hidden email]> wrote:
>> > Did you change the default path to qmake while running cmake initially?
>> >
>> > On Thu, Feb 9, 2017 at 12:13 PM, Bill Lorensen <[hidden email]>
>> > wrote:
>> >>
>> >> Folks,
>> >>
>> >> I have found the problem, but not a fix.
>> >>
>> >> For example, in the link.txt file for
>> >>
>> >> Slicer/Base/QTGUI
>> >> /usr/local/lib/libPythonQT.dylib is listed, but it should be:
>> >>
>> >>
>> >> /Users/lorensen/ProjectsGIT/Slicer-Superbuild/CTK-build/PythonQt-build/./libPythonQt.dylib
>> >>
>> >> If I manually edit that link.txt file, Slicer starts (although lots of
>> >> scriptable modules fail to load).
>> >>
>> >> Now I need to see why the wrong library is being used.
>> >>
>> >>
>> >> --
>> >> Unpaid intern in BillsBasement at noware dot com
>> >> _______________________________________________
>> >> slicer-devel mailing list
>> >> [hidden email]
>> >> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
>> >> To unsubscribe: send email to [hidden email] with
>> >> unsubscribe as the subject
>> >>
>> >>
>> >> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>> >
>> >
>>
>>
>>
>> --
>> Unpaid intern in BillsBasement at noware dot com
>
>



--
Unpaid intern in BillsBasement at noware dot com
_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Some progress on my Sierra build woes

Steve Pieper-2
In reply to this post by andrey.fedorov
Does /usr/local/lib/libPythonQt.dylib actually exist on your system?  Maybe you have a system install of PythonQt and it is being found instead of the one in CTK-build.

-Steve

On Thu, Feb 9, 2017 at 1:24 PM, Andrey Fedorov <[hidden email]> wrote:
Bill, you may need to rebuild from scratch after changing the qmake path ... :(

On Thu, Feb 9, 2017 at 1:01 PM, Bill Lorensen <[hidden email]> wrote:
No. But it finds /usr/local/bin/qmake. If I change to
/usr/local/Cellar/qt/4.8.7_3/bin/qmake I still get the same errors and
/usr/local/lib/libPythonQt.dylib is still listed in the link.txt
files.


On Thu, Feb 9, 2017 at 12:41 PM, Andrey Fedorov
<[hidden email]> wrote:
> Did you change the default path to qmake while running cmake initially?
>
> On Thu, Feb 9, 2017 at 12:13 PM, Bill Lorensen <[hidden email]>
> wrote:
>>
>> Folks,
>>
>> I have found the problem, but not a fix.
>>
>> For example, in the link.txt file for
>>
>> Slicer/Base/QTGUI
>> /usr/local/lib/libPythonQT.dylib is listed, but it should be:
>>
>> /Users/lorensen/ProjectsGIT/Slicer-Superbuild/CTK-build/PythonQt-build/./libPythonQt.dylib
>>
>> If I manually edit that link.txt file, Slicer starts (although lots of
>> scriptable modules fail to load).
>>
>> Now I need to see why the wrong library is being used.
>>
>>
>> --
>> Unpaid intern in BillsBasement at noware dot com
>> _______________________________________________
>> slicer-devel mailing list
>> [hidden email]
>> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
>> To unsubscribe: send email to [hidden email] with
>> unsubscribe as the subject
>>
>> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>
>



--
Unpaid intern in BillsBasement at noware dot com


_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ


_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Some progress on my Sierra build woes

Bill Lorensen
In reply to this post by andrey.fedorov
Yes it does. How do I uninstall it?

On Feb 9, 2017 3:19 PM, "Steve Pieper" <[hidden email]> wrote:
Does /usr/local/lib/libPythonQt.dylib actually exist on your system?  Maybe you have a system install of PythonQt and it is being found instead of the one in CTK-build.

-Steve

On Thu, Feb 9, 2017 at 1:24 PM, Andrey Fedorov <[hidden email]> wrote:
Bill, you may need to rebuild from scratch after changing the qmake path ... :(

On Thu, Feb 9, 2017 at 1:01 PM, Bill Lorensen <[hidden email]> wrote:
No. But it finds /usr/local/bin/qmake. If I change to
/usr/local/Cellar/qt/4.8.7_3/bin/qmake I still get the same errors and
/usr/local/lib/libPythonQt.dylib is still listed in the link.txt
files.


On Thu, Feb 9, 2017 at 12:41 PM, Andrey Fedorov
<[hidden email]> wrote:
> Did you change the default path to qmake while running cmake initially?
>
> On Thu, Feb 9, 2017 at 12:13 PM, Bill Lorensen <[hidden email]>
> wrote:
>>
>> Folks,
>>
>> I have found the problem, but not a fix.
>>
>> For example, in the link.txt file for
>>
>> Slicer/Base/QTGUI
>> /usr/local/lib/libPythonQT.dylib is listed, but it should be:
>>
>> /Users/lorensen/ProjectsGIT/Slicer-Superbuild/CTK-build/PythonQt-build/./libPythonQt.dylib
>>
>> If I manually edit that link.txt file, Slicer starts (although lots of
>> scriptable modules fail to load).
>>
>> Now I need to see why the wrong library is being used.
>>
>>
>> --
>> Unpaid intern in BillsBasement at noware dot com
>> _______________________________________________
>> slicer-devel mailing list
>> [hidden email]
>> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
>> To unsubscribe: send email to [hidden email] with
>> unsubscribe as the subject
>>
>> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>
>



--
Unpaid intern in BillsBasement at noware dot com


_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ


_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Some progress on my Sierra build woes

Steve Pieper-2
In reply to this post by andrey.fedorov
Hmm, not sure- I don't think I've never seen a system install of PythonQt before.  If you look in CTK-build/CMakeExternals/Install/PythonQt you can see all the lib and include files.  They all have PythonQt in the filename so you should be able to easily find and remove them as a workaround.

Even if a system PythonQt exists CTK's build system should be always preferring it's own build over any system ones.  @jcfr may be able to shed some light on that.

-Steve


On Thu, Feb 9, 2017 at 3:44 PM, Bill Lorensen <[hidden email]> wrote:
Yes it does. How do I uninstall it?

On Feb 9, 2017 3:19 PM, "Steve Pieper" <[hidden email]> wrote:
Does /usr/local/lib/libPythonQt.dylib actually exist on your system?  Maybe you have a system install of PythonQt and it is being found instead of the one in CTK-build.

-Steve

On Thu, Feb 9, 2017 at 1:24 PM, Andrey Fedorov <[hidden email]> wrote:
Bill, you may need to rebuild from scratch after changing the qmake path ... :(

On Thu, Feb 9, 2017 at 1:01 PM, Bill Lorensen <[hidden email]> wrote:
No. But it finds /usr/local/bin/qmake. If I change to
/usr/local/Cellar/qt/4.8.7_3/bin/qmake I still get the same errors and
/usr/local/lib/libPythonQt.dylib is still listed in the link.txt
files.


On Thu, Feb 9, 2017 at 12:41 PM, Andrey Fedorov
<[hidden email]> wrote:
> Did you change the default path to qmake while running cmake initially?
>
> On Thu, Feb 9, 2017 at 12:13 PM, Bill Lorensen <[hidden email]>
> wrote:
>>
>> Folks,
>>
>> I have found the problem, but not a fix.
>>
>> For example, in the link.txt file for
>>
>> Slicer/Base/QTGUI
>> /usr/local/lib/libPythonQT.dylib is listed, but it should be:
>>
>> /Users/lorensen/ProjectsGIT/Slicer-Superbuild/CTK-build/PythonQt-build/./libPythonQt.dylib
>>
>> If I manually edit that link.txt file, Slicer starts (although lots of
>> scriptable modules fail to load).
>>
>> Now I need to see why the wrong library is being used.
>>
>>
>> --
>> Unpaid intern in BillsBasement at noware dot com
>> _______________________________________________
>> slicer-devel mailing list
>> [hidden email]
>> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
>> To unsubscribe: send email to [hidden email] with
>> unsubscribe as the subject
>>
>> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>
>



--
Unpaid intern in BillsBasement at noware dot com


_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Some progress on my Sierra build woes

Bill Lorensen
In reply to this post by andrey.fedorov
My Sierra is fresh. I don't recall installing PythonQt.


On Thu, Feb 9, 2017 at 4:05 PM, Steve Pieper <[hidden email]> wrote:

> Hmm, not sure- I don't think I've never seen a system install of PythonQt
> before.  If you look in CTK-build/CMakeExternals/Install/PythonQt you can
> see all the lib and include files.  They all have PythonQt in the filename
> so you should be able to easily find and remove them as a workaround.
>
> Even if a system PythonQt exists CTK's build system should be always
> preferring it's own build over any system ones.  @jcfr may be able to shed
> some light on that.
>
> -Steve
>
>
> On Thu, Feb 9, 2017 at 3:44 PM, Bill Lorensen <[hidden email]>
> wrote:
>>
>> Yes it does. How do I uninstall it?
>>
>> On Feb 9, 2017 3:19 PM, "Steve Pieper" <[hidden email]> wrote:
>>>
>>> Does /usr/local/lib/libPythonQt.dylib actually exist on your system?
>>> Maybe you have a system install of PythonQt and it is being found instead of
>>> the one in CTK-build.
>>>
>>> -Steve
>>>
>>> On Thu, Feb 9, 2017 at 1:24 PM, Andrey Fedorov <[hidden email]>
>>> wrote:
>>>>
>>>> Bill, you may need to rebuild from scratch after changing the qmake path
>>>> ... :(
>>>>
>>>> On Thu, Feb 9, 2017 at 1:01 PM, Bill Lorensen <[hidden email]>
>>>> wrote:
>>>>>
>>>>> No. But it finds /usr/local/bin/qmake. If I change to
>>>>> /usr/local/Cellar/qt/4.8.7_3/bin/qmake I still get the same errors and
>>>>> /usr/local/lib/libPythonQt.dylib is still listed in the link.txt
>>>>> files.
>>>>>
>>>>>
>>>>> On Thu, Feb 9, 2017 at 12:41 PM, Andrey Fedorov
>>>>> <[hidden email]> wrote:
>>>>> > Did you change the default path to qmake while running cmake
>>>>> > initially?
>>>>> >
>>>>> > On Thu, Feb 9, 2017 at 12:13 PM, Bill Lorensen
>>>>> > <[hidden email]>
>>>>> > wrote:
>>>>> >>
>>>>> >> Folks,
>>>>> >>
>>>>> >> I have found the problem, but not a fix.
>>>>> >>
>>>>> >> For example, in the link.txt file for
>>>>> >>
>>>>> >> Slicer/Base/QTGUI
>>>>> >> /usr/local/lib/libPythonQT.dylib is listed, but it should be:
>>>>> >>
>>>>> >>
>>>>> >> /Users/lorensen/ProjectsGIT/Slicer-Superbuild/CTK-build/PythonQt-build/./libPythonQt.dylib
>>>>> >>
>>>>> >> If I manually edit that link.txt file, Slicer starts (although lots
>>>>> >> of
>>>>> >> scriptable modules fail to load).
>>>>> >>
>>>>> >> Now I need to see why the wrong library is being used.
>>>>> >>
>>>>> >>
>>>>> >> --
>>>>> >> Unpaid intern in BillsBasement at noware dot com
>>>>> >> _______________________________________________
>>>>> >> slicer-devel mailing list
>>>>> >> [hidden email]
>>>>> >> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
>>>>> >> To unsubscribe: send email to [hidden email]
>>>>> >> with
>>>>> >> unsubscribe as the subject
>>>>> >>
>>>>> >>
>>>>> >> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>>>>> >
>>>>> >
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> slicer-devel mailing list
>>>> [hidden email]
>>>> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
>>>> To unsubscribe: send email to [hidden email] with
>>>> unsubscribe as the subject
>>>>
>>>> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>>>
>>>
>



--
Unpaid intern in BillsBasement at noware dot com
_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
Reply | Threaded
Open this post in threaded view
|

Re: Some progress on my Sierra build woes

Bill Lorensen
SUCCESS!

I deleted /usr/locl/lib/libPythonQt.dylib, cleaned by build directory
and rebuilt. Now I load and run Slicer successfully.

I don't know:
1) where /usr/local/lib/libPythonQt.dylib came from
2) Why CTK kept using it, rather thah it's own copy.

Bill


On Thu, Feb 9, 2017 at 4:11 PM, Bill Lorensen <[hidden email]> wrote:

> My Sierra is fresh. I don't recall installing PythonQt.
>
>
> On Thu, Feb 9, 2017 at 4:05 PM, Steve Pieper <[hidden email]> wrote:
>> Hmm, not sure- I don't think I've never seen a system install of PythonQt
>> before.  If you look in CTK-build/CMakeExternals/Install/PythonQt you can
>> see all the lib and include files.  They all have PythonQt in the filename
>> so you should be able to easily find and remove them as a workaround.
>>
>> Even if a system PythonQt exists CTK's build system should be always
>> preferring it's own build over any system ones.  @jcfr may be able to shed
>> some light on that.
>>
>> -Steve
>>
>>
>> On Thu, Feb 9, 2017 at 3:44 PM, Bill Lorensen <[hidden email]>
>> wrote:
>>>
>>> Yes it does. How do I uninstall it?
>>>
>>> On Feb 9, 2017 3:19 PM, "Steve Pieper" <[hidden email]> wrote:
>>>>
>>>> Does /usr/local/lib/libPythonQt.dylib actually exist on your system?
>>>> Maybe you have a system install of PythonQt and it is being found instead of
>>>> the one in CTK-build.
>>>>
>>>> -Steve
>>>>
>>>> On Thu, Feb 9, 2017 at 1:24 PM, Andrey Fedorov <[hidden email]>
>>>> wrote:
>>>>>
>>>>> Bill, you may need to rebuild from scratch after changing the qmake path
>>>>> ... :(
>>>>>
>>>>> On Thu, Feb 9, 2017 at 1:01 PM, Bill Lorensen <[hidden email]>
>>>>> wrote:
>>>>>>
>>>>>> No. But it finds /usr/local/bin/qmake. If I change to
>>>>>> /usr/local/Cellar/qt/4.8.7_3/bin/qmake I still get the same errors and
>>>>>> /usr/local/lib/libPythonQt.dylib is still listed in the link.txt
>>>>>> files.
>>>>>>
>>>>>>
>>>>>> On Thu, Feb 9, 2017 at 12:41 PM, Andrey Fedorov
>>>>>> <[hidden email]> wrote:
>>>>>> > Did you change the default path to qmake while running cmake
>>>>>> > initially?
>>>>>> >
>>>>>> > On Thu, Feb 9, 2017 at 12:13 PM, Bill Lorensen
>>>>>> > <[hidden email]>
>>>>>> > wrote:
>>>>>> >>
>>>>>> >> Folks,
>>>>>> >>
>>>>>> >> I have found the problem, but not a fix.
>>>>>> >>
>>>>>> >> For example, in the link.txt file for
>>>>>> >>
>>>>>> >> Slicer/Base/QTGUI
>>>>>> >> /usr/local/lib/libPythonQT.dylib is listed, but it should be:
>>>>>> >>
>>>>>> >>
>>>>>> >> /Users/lorensen/ProjectsGIT/Slicer-Superbuild/CTK-build/PythonQt-build/./libPythonQt.dylib
>>>>>> >>
>>>>>> >> If I manually edit that link.txt file, Slicer starts (although lots
>>>>>> >> of
>>>>>> >> scriptable modules fail to load).
>>>>>> >>
>>>>>> >> Now I need to see why the wrong library is being used.
>>>>>> >>
>>>>>> >>
>>>>>> >> --
>>>>>> >> Unpaid intern in BillsBasement at noware dot com
>>>>>> >> _______________________________________________
>>>>>> >> slicer-devel mailing list
>>>>>> >> [hidden email]
>>>>>> >> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
>>>>>> >> To unsubscribe: send email to [hidden email]
>>>>>> >> with
>>>>>> >> unsubscribe as the subject
>>>>>> >>
>>>>>> >>
>>>>>> >> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>>>>>> >
>>>>>> >
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> slicer-devel mailing list
>>>>> [hidden email]
>>>>> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
>>>>> To unsubscribe: send email to [hidden email] with
>>>>> unsubscribe as the subject
>>>>>
>>>>> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>>>>
>>>>
>>
>
>
>
> --
> Unpaid intern in BillsBasement at noware dot com
> _______________________________________________
> slicer-devel mailing list
> [hidden email]
> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
> To unsubscribe: send email to [hidden email] with unsubscribe as the subject
> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ



--
Unpaid intern in BillsBasement at noware dot com
_______________________________________________
slicer-devel mailing list
[hidden email]
http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
To unsubscribe: send email to [hidden email] with unsubscribe as the subject
http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ